|
MICROSEAL-FR
Flame Retardant
|
|
MicroSeal-FR is one of very few products worldwide rated to pass not only NFPA 701, but also ASTM E-84, and CAN2-4.2-M77. Meets and exceeds MCA requirements for yacht interiors / exteriors.
MicroSeal-FR is a Class A, durable, non-toxic, non-allergenic fire retardant chemical coating which is carried in an aguenous (water) solution. When completely dried and cured, it is both odorless and colorless and is visible only under a long wave ultra violet light. When applied and cured for 48 hours, it will resist flame under the most adverse conditions. MicroSeal-FR can be applied to a wide variety of items, including carpeting, bedding, mattresses, upholstery, draperies, paper, and lumber. This product meets or exceeds the criteria for a Class A rating on most materials.
What is a Class A fire retardant?
The American Society for Testing and Materials (ASTM) and the National Fire Protection Association (NFPA) are two nationally recognized organizations, which have developed tests setting standards of flammability. On a scale of 0-200 (least to most), only those materials with a flame spread of under 25 qualify as Class A Fire Retardants. How does it work? Fire spreads as the temperature of the heat source rises to the point of ignition. Initially, the spread is restricted to items in direct contact with the flame. However, when the temperature reaches 1400 degrees, all combustibles and gases ignite in a phenomenon called Flashover. Flashovers can occur in less than 3 minutes. By significantly increasing the ignition point of combustible items, it drastically decreases the danger of fire.
How is MicroSeal-FR different from other flame proofing products?
MicroSeal-FR can treat both natural and synthetic materials. The product is UV stable and has been demonstrated to significantly inhibit sun fading and sun rot relative to other flame retardants. It dries to an invisible durable protective shield with no residue or rings to change the esthetics of treated Items. When dry it is non corrosive to metal.
Additionally: MicroSeal (Permanent Fabric Protection) meets FAA criteria burn tests. (FAR 25.853)
|
R E C O G N I Z E D W O R L D W I D E A S T H E B E S T
ASID Partner / NWSID PRA Member
Con
COME FLY WITH US 425.814.6464
Copyright2007MicroSeal
|
|
